Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800

Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800

$20.95 $79.99
Skip to product information
Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
  • Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800
Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800

Table Saw Alignment Gauge with 0.001-Inch Dial Indicator R9800

$20.95 $79.99
Shipping calculated at checkout.
- ZERO-WOBBLE BALL SET SCREW SYSTEM — NOT PLASTIC GLIDE BLOCKS: Most miter bars rely on spring plungers or plastic glide blocks that wear unevenly and give a different reading every pass. The AC382 uses adjustable steel ball set screws that lock into any standard 3/4" (19mm) miter slot with uniform pressure — same reading at the front of the blade, same reading at the back, repeatable on the first pull, not the fifth. - 0.001" MECHANICAL DIAL — NO BATTERIES, NO DRIFT, NO SURPRISES: Digital indicators read fast — until the battery dies mid-session or drifts after a season of shop vibration. The AC382 runs on a mechanical dial indicator mounted on a CNC-milled 6061 aluminum body with a hard-anodized finish and laser-etched scale markings. Reads the same in year three as it did on day one. No electronics, no calibration creep, no excuses. - CABINET DOORS THAT CLOSE FLUSH. MITERS THAT MEET AT THE 4TH CORNER: 0.005" of blade-to-slot drift across a 24" rip becomes a 1/8" gap when four miter corners come together. Dial in blade parallelism, square the fence to the same dial, and tenon shoulders seat flush off the saw — no chisel rework, no shimming a proud door bottom. This is the tool that eliminates the rework, not just measures it. - ALIGNED BEFORE THE COFFEE GOES COLD — FIRST-USE CONFIDENCE OUT OF THE BOX: No packing tape shimming. No chasing the same .003" across an afternoon. Drop the bar in the slot, snug the ball screws, zero the indicator on a tooth — and the saw is calibrated. Whether it's your first alignment or your fiftieth, setup takes minutes, not a Sunday afternoon. - ONE GAUGE RUNS THE WHOLE SHOP — TABLE SAW, BANDSAW, JOINTER & MORE: Burn marks on rips, kickback, blade binding — all symptoms of misalignment. Use the AC382 as a table saw alignment gauge, bandsaw fence alignment tool, jointer alignment gauge, crosscut sled calibration tool, and router table fence square. Includes 0.5" dial indicator and hex wrench. Compatible with all standard 3/4" miter slots. Ready to use out of the box.

You may also like